There are various options for mounting and clamping your band heater.
 |
Standard Clamping Strap |
|
|
|
 |
Welded On Barrel Nuts • Welded on barrel Nuts are optional on any screw or lead termination. • Excellent clamping option for heaters with holes or cutouts. • No strap to loosen or adjust. • Standard Barrel nuts are 3/8” diameter and use a 10-24 socket head cap screw. • 5/8” clearance required. |
 |
Wedge Lock Construction • Wedge mount is ideal for low profile clearance and when access is limited. • 1/8” clearance required. • Min I.D. 1” • Min width 1” • Standard wedge exit is out each side of gap. |
 |
Flange Construction • Flange lock up is best for heaters with multiple holes or cut outs. • 1/2” clearance required • Min. I.D. 1” • Min. width 1” |
 |
Spring Loaded Clamping • Tig welded barrel nuts. • Spring loaded clamping. • Stainless stell top metal.. • Retains tight heater fit during start-up. |
